1.Advantages of film sticking
Since the in-mold label and the plastic part are naturally integrated, the deformation of the bottle body is deformed, so that foaming and wrinkling do not occur. At the same time, the in-mold labeling and printing is exquisite, and can be used for special treatments such as laser and aluminum plating, so that the product packaging grade is greatly improved;
2.Anti-counterfeiting function.
In-mold labeling system is relatively complicated, reducing the possibility of fraud, which provides a very reliable brand maintenance means for users who pursue quality, quality and brand-oriented plastic packaging products;
3.Peace and environmental protection.
The common label is to be labeled after the container is formed, and the in-mold label and the container are molded once, thereby preventing contamination of the bottle by the labeling process. Moreover, the in-mold label and the bottle body are completely integrated with the same chemical composition, can be recycled together, and have high recycling efficiency.
4.Not easy to fall off and damage
The in-mold label has the properties of waterproof, oil proof, mildew proof, acid and alkali resistance, friction resistance, etc., and is not easily damaged under special conditions.
5.The side walls are reinforced.
The label is embedded in the side wall of the plastic container to increase the crush resistance of the side wall of the container by 20% so that the label does not separate when the container is warped and squeezed.
6.高Efficiency and high efficiency.
In-mold labeling and container molding are completed at one time, which makes the packaging production faster and the filling line efficiency can be increased by 5%~20%. Since the method of manual labeling after filling is omitted, the cost is reduced.
The label can be replaced without interrupting production.
The overall combined interest is significantly lower than the normal label and direct silk screen.
